Jump to content

DC Rivals HyperCoaster construction discussion


Richard
 Share

Recommended Posts

15 minutes ago, Santa07 said:

Where did you get this from? Because it's so far away from the rest of the park, we aren't sure yet that what's been built is taller than Superman, which it might not be. And it's certainly not longer than any other coaster in the park, heck, Road Runner is probably still longer than it at the moment.

Sorry, I meant longer as in one length not track length 

Link to comment
Share on other sites

38 minutes ago, wileecoyote said:

WOW! Just visited the RCDB website about 20 minutes ago (internet crashed so took me a while to post this) but apparently this coaster is going to be a fair way over the 200ft mark! 

Screen Shot 2017-05-03 at 6.47.58 pm.png

Upon having another look - this has since been changed back to the original height. Wonder what that was? :huh:

RCDB rounds to 1 decimal place - i've never seen a metric conversion to feet listed at more than a single decimal. 

This is definitely photoshopped, most likely by the original poster.

Link to comment
Share on other sites

49 minutes ago, Santa07 said:

Where did you get this from? Because it's so far away from the rest of the park, we aren't sure yet that what's been built is taller than Superman, which it might not be. And it's certainly not longer than any other coaster in the park, heck, Road Runner is probably still longer than it at the moment.

Someone make a home made clinometer and go take some rough measurements. Can work out an approximate height pretty easy.

finished_clinometer.jpg

Link to comment
Share on other sites

4 minutes ago, AlexB said:

RCDB rounds to 1 decimal place - i've never seen a metric conversion to feet listed at more than a single decimal. 

This is definitely photoshopped, most likely by the original poster.

Or script edited.  I just thought the same thing.  Everybody take note.  Alexb did not wake up in the last shower.

@Levithian Why make one when I already have one.

Link to comment
Share on other sites

53 minutes ago, Levithian said:

Someone make a home made clinometer and go take some rough measurements. Can work out an approximate height pretty easy.

finished_clinometer.jpg

Kids loved this, thanks.  However I think i will stick to my laser measure we use for sports field poles.... :P 

Link to comment
Share on other sites

Well here's my update, and some new things we hadn't noticed yet. Along with the completed turn around point, new supports are going up, which appear will twist under and then back of the track. Some supports further down are installed, as well as some down the narrow run (around the lift hill area) and near the brake run. Very tightly twisted track has arrived. More stair pieces have arrived. And there are also some very thick columns.IMG_7726.thumb.JPG.518f686d83db4169996127ddf4a5e67e.JPGIMG_7728.thumb.JPG.45b8dd8850e518027478574cb807f297.JPGIMG_7729.thumb.JPG.4e7d582211094689fbcea57b3decf5bb.JPGIMG_7731.thumb.JPG.5398efb15ac9ed55d207fb486776c474.JPGIMG_7734.thumb.JPG.69730770b30a456d2022f6443c2ee3c2.JPGIMG_7747.thumb.JPG.0ae5da6dc0381da87199cee06e63a652.JPGIMG_7748.thumb.JPG.a4ee8fbd0a5a74122130d33582ef492e.JPGIMG_7750.thumb.JPG.09ba95917360853538d81a17617f741b.JPGIMG_7755.thumb.JPG.e17623b069f04ffffa1102e62d562be1.JPGIMG_7759.thumb.JPG.bbc183ec4be01b14c3be5d04b39831dd.JPGIMG_7761.thumb.JPG.97bd7ddbacde3334e83b62bb20d1ec78.JPGIMG_7756.thumb.JPG.fa69e4dab4e7ced845ff34a7441a079f.JPGIMG_7758.thumb.JPG.704a84c503f0a203dbf6bb7e6889daff.JPGIMG_7764.thumb.JPG.959ed840e17662d545f62f18a92bc25a.JPG

IMG_7753.JPG

Edited by themagician
Link to comment
Share on other sites

I'm honestly surprised at the speed this thing is going up at, however I haven't looked at the time it took other Movie World coasters to go up. For some reason I suspected construction would be slower but it's great to see the progress made so far. Obviously lots more is still to come but from the time they began construction that's a lot of track that's gone up. Also thanks @themagician for the awesome pics. 

Link to comment
Share on other sites

40 minutes ago, bladex said:

speaking of the lift hill is that on the site somewhere or will that be delivered later?

Supports are likely to be on location, piece number 9 in one of my above photos is quite large and multiple of them, so I'd say that is for a high section of the lift hill. But to my knowledge, no track is on site yet 

Link to comment
Share on other sites

Looking at the skyline of the park and everyone saying it will be the height of batwing at 200ft.  

Now its hard to imagine 200ft lift hill out the front of the park. Batwing (200ft) as a comparison is further back from where the lift hill will be and therefore looks smaller.    

So I have done a quick Photoshop and doubled the height of Green lantern (108 ft) give or take a few ft and doubled it in height to show where the lift hill height will roughly be.

:o:o:o:D  

Coaster height.jpg

Edited by Inverted
Photo upload error
Link to comment
Share on other sites

1 hour ago, themagician said:

Supports are likely to be on location, piece number 9 in one of my above photos is quite large and multiple of them, so I'd say that is for a high section of the lift hill. But to my knowledge, no track is on site yet 

The last footing label before the lift hill is labeled K08.  That would make the number 9 support the first major support of the lift hill.  Hopefully you remember the angled footings at the bottom of the lift hill,  The angled footings are not part of the standard K supports so it will be the first support after the track connects to the angled footings.

Link to comment
Share on other sites

17 hours ago, themagician said:

IMG_7759.thumb.JPG.bbc183ec4be01b14c3be5d04b39831dd.JPG

Bottom of lift hill?

Could we be getting an almost 90 degree drop on this coaster, going from the footing in the left of picture (assuming it is the last of the lift hill/first in drop) that does not leave a lot of area to get from 200Ft+ down to those two supports.

I should say though this will be the first coaster of this size I have seen, so maybe someone who has ridden something of similar height overseas may be able to comment on this for me. 

Link to comment
Share on other sites

  • Richard changed the title to DC Rivals HyperCoaster construction discussion
  • joz locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.