Jump to content

KINGDA KA the new king of coasters


Inverted
 Share

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

The following is some information on why Kingda Ka is closed for those who are unaware as to why. Article source

Kingda Ka's loose liner cover But Kristin Siebeneicher, PR manager for the New Jersey park, says that Six Flags technicians and engineers, along with representatives from Intamin, the coaster's manufacturer, have determined that a piece of the liner that covers the trough of the launch track came loose. That caused the train to malfunction and damage other pieces along the track, including the ride's brake fins. Siebeneicher says that the team investigating the malfunction has not established what caused the liner to come loose, but that Intamin and Six Flags will "take steps to make certain it will not happen again. Safety is our top priority." Kingda Ka, like Knott's Berry Farm's Xcelerator and other Intamin rocket coasters, uses a hydraulic launch system. Unlike a traditional coaster, which uses a chain to pull its trains up a lift hill, the train launches quickly accelerates out of the station along a horizontal section of launch track. A hydraulic motor, capable of delivering 20,800 horsepower, drives giant winches around which the ride's launch cable is wound. A small "catch car" attached to the cable latches onto the middle of each train. When it launches, the catch car accelerates the train to a world-record 128 mph in 3.5 seconds. About two-thirds of the way down the launch track, brakes slow the catch car immediately after it disengages from the train. Momentum and gravity take the train up and over the top-hat tower, through a 129-foot hill designed to deliver out-of-your-seat airtime, and back to the station. The entire ride takes 50.6 seconds. Siebeneicher says that while Kingda Ka's brakes were damaged and will need to be replaced, they were operating properly at the time of the malfunction; the catch car's brakes were engaged to slow it down, while the train's brakes were in the down position to allow it to continue up the top-hat tower. She adds that the brakes and other damaged parts that need to be replaced were all custom-made and need to be fabricated to order by Intamin. The Swiss-based manufacturer has begun producing the replacement parts, but Siebeneicher is not sure how long it will take. Once the parts have been assembled, they will need to be installed and tested. Then Kingda Ka will need to be inspected again before it can reopen.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.